PSI INDUSTRIAL SANITARY GAUGE ASSEMBLY

PSI INDUSTRIAL SANITARY GAUGE ASSEMBLY

APPLICATIONS:

  • To prevent any clogging of viscous materials (i.e. paint, ink, heavy/thick liquids) that may solidify
  • Specs–Gauge
  • Crimp-On Ring Style
  • Bayonet Ring Style

DESCRIPTION & FEATURES:

  • Stainless steel gauge case
  • 3A approved sanitary seal (filled)
  • Brass or stainless steel internals
  • ASME B40.100 compliant
  • CRN registered

DOCUMENTATION:

Specs – Gauge Crimp-On Ring Style Bayonet Ring Style
Dial 2.5” (63mm),  4” (100mm), white aluminum with black and red markings 2.5” (63mm), 4” (100mm) white aluminum with black and red markings
Case AISI 304 SS AISI 304 SS
Lens Polycarbonate Polycarbonate
Ring AISI 304 SS AISI 304 SS
Socket OT 58 brass or AISI 316 SS 316L SS
Connection 1/4” NPT standard with restricted orifice 1/4” NPT
Bourdon Tube Phosphor bronze C-shaped for pressures up to and including 600 psi (4,147 kPa) unless SS internals are specified AISI 316 SS C-shaped for 1000 psi (6,895 kPa) 316L SS, drawn seamless
Movement OT 59 brass or SS 304 SS Over/under stops for 4” (100mm) dial only
Pointer Aluminum, anodized black

2.5” (63mm): Aluminum, anodized black

4” (100mm): Aluminum, anodized black, micrometer adjustable

Welding Tin/copper alloy for pressures below 600 psi (4,147 kPa), 316 SS TIG Argon arc for pressures 600 psi (4,147 kPa) and above TIG
Over-Pressure Limit 25% for pressures up to 600 psi (9,653 kPa)

30% for pressures up to 600 psi (4,147 kPa)

15% for pressures over 600 psi (4,147 kPa)

Gasket Material

Silicone rubber for socket

EPDM for lens, filling plug and blow-out vent

2.5” (63mm): Buna N for case and block seal, Monoprene for lens seal

4” (100mm): EPDM

Working Pressure Maximum 75% of full scale value Maximum 75% of full scale value
Ambient/Process Temperature

Dry: -40°F to 150°F (-40°C to 65°C)

Glycerin Filled: -4°F to 150°F (-20°C to 65°C)

Dry: -40°F to 150°F (-40°C to 65°C)

Glycerin Filled: -4°F to 150°F (-20°C to 65°C)

Accuracy ±1.5% of full scale

2.5” (63mm): ±1.5% of full scale

4” (100mm): ±1% ANSI/ASME Grade 1A

Enclosure Rating IP65 IP66 per UEC 529, UNI 8896

Specs – 3A Approved Seal
Housing AISI 316 SS
Diaphragm AISI 316L SS, welded
Fill Liquid Glycerin
Minimum Operating Pressure 30 psi (200 kPa)
Maximum Operating Pressure 1,000 psi (6,900 kPa)
Gauge Connection 1/4” NPT female
Process Connection 1.5” (40mm) and 2” (50mm), Tri-Clamp® fitting standard
Process Temperature -4°F to 248°F (-20°C to 120°C)
Surface Finish 8 Ra

SUPPORT
TOOLS

Translate »